HM14 wing
Picture-reports of constructions/parts.
Prepare to put the ribs and spars
together. Probably the front wing central part.
Making a cut-out in the trailing edge to ease the access to the
cockpit.
Note the hole in the front spar. I guess it is to give access to
the metal plate inside the spar. This plate with thread or welded
nuts will fixed on the plates that create the rotation point of the
front wing. If I am wrong, please, correct me.
The
bottom plate of where the fuel tank will be is added.
Covering the leading edge. Here
Pierre uses also bands to fix the plywood while the glue is
drying.
In the middle of the front spar you see a piece of hard wood. It
would make me think that it is there for a central fixation point.
So ...I must be wrong about my comments at the second picture.
Pierre wrote me that he intends the central strut, but that he
placed the parts needed to use the double struts too. So, he can
change if he wants.
Waiting for the covering?
